system insulation boards
Product sorting
6 items total
List of products
–20 %
17,32 €
System insulation board - with protective film - 1400x800mm (1.12m2); black -...
–20 %
16,63 €
System insulation panel - with a protective waterproofing film-1000x500mm-0,50m2;...
–20 %
16,82 €
System insulation panel - with protective waterproofing film - 1200x600mm-0.72m2;...
Listing controls
6 items total
IVAR.TB 20 P 05 - without waterproofing film
- laying spacing 75 / 150 / 225 / 300 mm
- usable size 1200 x 600 mm = 0.72 m2
- for pipes with an outer diameter of 16, 17 and 18 mm
- for underfloor heating thermal insulation without protective film (white), for ALPEX or PEX pipes
IVAR.TH 15 P, IVAR.TH 30 P - with protective waterproofing film
- IVAR.TH 30P - laying spacing 75 /150 /225 /300 mm, usable size 1200 x 600 mm = 0.72 m2
- IVAR.TH 15P – laying spacing 50 /100 /150 /200 /250 /300 mm, usable size 1000 x 500 mm = 0.50 m2
- for pipes with an outer diameter of 16, 17 and 18 mm
- for underfloor heating thermal insulation with increased thermal resistance and hardened
walkable film (black), for ALPEX or PEX pipes
IVAR.COMBITOP ND 10 N, IVAR.COMBITOP ND 30 N - with protective waterproofing film
IVAR.TR 01-RENOVA, IVAR.TR 02-RENOVA - dry system
- IVAR.TR 01 RENOVA - system insulation board
- laying spacing 167 / 250 / 333 mm
- usable size 1000 x 500 mm = 0.5 m2
- for underfloor heating thermal insulation without protective film, locks for installing reflective sheets only for Ø 16 mm ALPEX or PEX pipes
- IVAR.TR 02 RENOVA - reflective sheet
- size 1000 x 120 x 0.4 mm
- reflective sheet for the IVAR.TR 01-RENOVA system board for Ø 16 mm ALPEX or PEX pipes, to increase heat transfer, made of galvanized sheet metal, perforated every 250 mm for easy cutting
- recommended use: for underfloor heating with low installation height, to minimize the static load on the structure during renovations, for installations in timber structures where applying mortar mixtures is not possible
Frequently Asked Questions
- What is the difference between a board with and without waterproofing film? A board with film has a factory-applied separation/waterproofing layer that protects the insulation from moisture from the screed directly during installation; without the film, this layer must be laid separately as a separate component.
- Can the board be cut to size? Yes, the boards can easily be cut with a knife or saw according to the room layout; the studs (grid) allow the pipe to be routed in any direction every 50 mm.
- What is the standard board thickness? Boards of various thicknesses are available depending on the building's thermal insulation requirements; the specific size and thickness can be found with each product.
- Do I also need an edge expansion tape with the boards? Yes, an expansion tape is always installed around the perimeter of the room and at transitions across expansion joints to compensate for the thermal expansion of the screed.