UNIMIX - universal assembly, cabinet N-MAX 3 - 3/4"xEK; 5-way; DAB.EVOSTA2 40-70/130; brass

Product detailed description

• PN 6, T = +90 °C
• the assembly includes: a universal control and pump module with a circulation pump and an integrated three-way mixing valve with alternative control options, a balancing control compression fitting and an adjustable flow BY-PASS, a thermostatic head with a separate immersion temperature sensor for constant-temperature control, a manifold with control flow meters, a collector with shut-off valves, mounting brackets, a safety high-limit thermostat, a thermometer, 2 pcs automatic air vent valves, 2 pcs rotary fill valves, 2 pcs ball valves with compression fittings, 2 pcs plugs, and an installation cabinet of the appropriate size
• connection thread, internal, 3/4" F
• material: brass CW617N

Attention:

• can be ordered without a cabinet - the price will be reduced by €63.00
• when ordering, state the cabinet type together with the order code: code only (flush-mounted), code + N (wall-mounted), or code + BS (without cabinet)
• optional accessory: IVAR.TE 3061 electrothermal head, 24 V, proportional control 0-10 V - surcharge €37.00
• optional accessory: IVAR.UNIMIX SSA 31 electric actuator, 230 V, 3-position control signal - surcharge €107.00

Note:
Switching off the circulation pump is not part of the set - it can be handled by a higher-level control system or by the IVAR.AC 614 E circulation-pump control thermostat.

Warning:
Before every commissioning of the heating system, especially when combining underfloor and radiator heating, we strongly recommend flushing the whole system according to the manufacturer's instructions. We recommend treating the heating system with GEL.LONG LIFE 100. The seller is not liable for functional defects caused by contamination in the system.

Frequently Asked Questions

• How do I choose the right manifold/accessory? Base your choice on the number of circuits required and the connection size - it must match the diameter of the main supply pipe from the heat source.
• Must installation be carried out by a professional? Fitting the manifold itself and its accessories can be handled by a handy DIY enthusiast, but connecting it to a working heating system and balancing it should be left to a heating technician.