UNIMIX - universal assembly, N-MAX cabinet 3 - 3/4"xEK; 8-way; DAB.EVOSTA2 40-70/130; brass

Product detailed description

UNIMIX - universal assembly, N-MAX 3 cabinet - 3/4"xEK; 8-way; DAB.EVOSTA2 40-70/130; brass

• PN 6, T = +90 °C
• the assembly includes:
  a universal control and pump module with a circulation pump and an integrated three-way mixing valve with alternative
  control options, a balancing control union and an adjustable flow BY-PASS, a thermostatic head with a separate
  immersion temperature sensor for constant-temperature control, a manifold with control flow meters, a collector with shut-off valves, mounting brackets, a safety cut-out thermostat, a thermometer, 2 pcs automatic air vents, 2 pcs rotary filling
  valves, 2 pcs ball valves with union, 2 pcs plugs and an installation cabinet of the appropriate size
• internal connection thread 3/4" F
• material: CW617N brass

Attention:

• can be ordered without a cabinet - the price will be reduced by 63,00 €
• when ordering, state the cabinet type after the order code: code only (flush-mounted), code + N (surface-mounted), or code + BS (without cabinet)
• optional accessory: electrothermal head IVAR.TE 3061, 24 V, proportional 0-10 V control - surcharge EUR 37.00
• optional accessory: electric actuator IVAR.UNIMIX SSA 31, 230 V, 3-position control signal - surcharge EUR 107.00

Note:
Switching off the circulation pump is not part of the assembly; it can be handled by a higher-level control or by the IVAR.AC 614 E circulation pump control thermostat.

Warning:
Before every start-up of the heating system, especially when combining underfloor and radiator heating, we strongly recommend flushing the whole system according to the manufacturer's instructions. We recommend treating the heating system with GEL.LONG LIFE 100. The seller is not liable for functional defects caused by contamination in the system.

Frequently Asked Questions

• How do I choose the right manifold/accessory? Go by the number of circuits needed and the connection size - it must match the diameter of the main supply pipe from the heat source.
• Must the installation be done by a professional? A skilled DIYer can fit the manifold and its accessories, but we recommend having a heating technician connect it to the working heating system and balance it.