ESYBOX electronic home water booster - special offer

Code: 60147200

napojeny tovar

Not rated Rating details

Brand: IVAR

1 426,80 € –10 %

1 426,80 € –10 % 1 284,12 € / pcs

1 week

Detailed information

22034 1 zverne srobenie na viacvrstvove potrubie alpex 16x2 alu ek

Action

–19 %

Compression fitting - for ALPEX multilayer pipe - 16x2 ALU-EK

In stock now (1831 pcs)

3,70 €

Compression fitting - for ALPEX multilayer pipe - 16x2 ALU-EK

500684

–37 %

Pipe calibrator

In stock now (25 pcs)

15,87 €

Pipe calibrator for PEX-AL-PEX pipe 16 mm / 20 mm / 26 mmA tool for calibrating...

KALIBRATOR NA POTRUBIE

–17 %

System insulation board UHP55 for underfloor heating (STIROTERMAL BASIC)

(0.004 m2)

11,72 €

System insulation polystyrene board UHP55 (STIROTERMAL BASIC) with increased...

STIROTERMAL BASIC

Action

–31 %

Avansa 2007 TX

In stock now (28 pcs)

56,31 €

The wireless thermostat Avansa 2007 TX is suitable for controlling most boilers....

BEZDROTOVY TERMOSTAT AVANSA 2007TX

Show all related products

Product detailed description

ESYBOX is electronic system for posilnenie pressure in home or commercial rozvodoch.
ESYBOX does not require no further komponenty for installation. Consists zo self-priming multistage ,

converter, and pressure, with high resolution and from tlakovej vessel with with a volume of 2 l.

Device can be installed in vertical i horizontal polohe and dokonca aj in sealed priestoroch without large replacement air.

Motor is cooled water, cover pump from ABS material, which reduces and device is equipped anti-vibration pads,

thanks to this vlastnostiam is achieved very low noise level (45 dB).

Built-in wireless device facilitates creation booster stations (communication possible to 4 zariadeniami ESYBOX)

and can be connect i with other DAB zariadeniami.

• Stage ochrany: IPX4
• Insulation class: F
• Pumped liquid: clean, without solid
and abrasive substances, non-aggressive, non-viscous,
non-crystallising, chemically neutral
• Maximum liquid temperature: + 40 °C
• Maximum teplota okolia: + 50°C
• Maximum depth sania: 8 m
• Maximum working pressure: 8 bar (800 kPa)

Frequently Asked Questions

How do I choose the right pump output/head? It must cover the pressure losses of your specific circuit (pipe length, number of fittings) - if in doubt, consult a heating engineer who can size the pump precisely for you.
Must installation be carried out by a professional? Fitting the pump into a prepared pipe run can be handled by a handy homeowner; we recommend having the electrical connection and system balancing checked by a professional.