PRESS elbow 90° - 20x20

Product detailed description

PRESS elbow 90°, IVAR.PT 5710, size: 20 x 20, packaging: 5 per bag / 150 per full box

• PN 10, T = +120 °C
• for connecting ALPEX pipes of the same diameter
• material: nickel-plated brass CW617N, stainless steel sleeve, EPDM seal
• compatible with B-F-TH type jaws

Frequently Asked Questions

• What tools do I need to install this fitting? Press fittings require specialised crimping pliers with the correct jaw type (commonly marked B, F, or TH depending on the system) matching the size and type of fitting - without the right tool the joint cannot be made or checked.
• How do I know the joint has been pressed correctly? Quality press fittings have a press indicator (e.g. a sealing O-ring that leaks if pressing is incomplete) - before embedding in a wall or screed, a pressure test of the whole system should always be carried out.
• Can the joint be taken apart after pressing? No, unlike a screwed (compression) fitting, a pressed joint is permanent and dismantling it requires cutting out the fitting and replacing it with a new one.
• Must installation be carried out by a professional? Yes, pressing fittings requires professional skill and correctly calibrated tools - we recommend entrusting it to a heating engineer/plumber, especially for joints that will be embedded in a wall or screed with no possibility of later inspection.