PUSH elbow 90°- PPSU - 16x16

Product detailed description

Push elbow 90° - PPSU, IVAR.PUSH - K, size: 16 x 16, pack: 10 pcs

• PN 10, T = +120 °C
• for easy connection of ALPEX pipe of the same diameters without the use of pressing tools
• material: PPSU plastic, stainless steel sleeve, EPDM seal

Frequently Asked Questions

• What tools do I need to install this fitting? Press fittings require specialized pressing pliers with the correct jaw type (commonly marked B, F or TH depending on the system) matching the size and type of the fitting - without the correct tool the joint cannot be made or checked.
• How do I know the joint has been pressed correctly? Quality press fittings have a press indicator (e.g. a sealing O-ring that leaks if pressing is incomplete) - before embedding the joint in a wall or screed, a pressure test of the whole system should always be carried out.
• Can the joint be taken apart after pressing? No, unlike a screwed (compression) connection, a pressed joint is permanent and taking it apart requires cutting out the fitting and replacing it with a new one.
• Must installation be carried out by a professional? Yes, pressing fittings requires professional skill and correctly calibrated tools - we recommend leaving it to a heating engineer/plumber, especially for joints that will be embedded in a wall or screed without the possibility of later inspection.