Stiebel Eltron ESH10O-PPlus - above the sink
Code: 201398Related products
Product detailed description
ESH10O-PPlus
- replacement for Tatramat EO 10 N
- small electric wall-mounted pressurized water heater above the sink
- without a tap
- volume: 10 litres
- output: 2 kW
Electric pressurized storage water heaters are designed for producing hot water wherever frequent, smaller draw-offs of hot water are needed.
Heaters ESH10O-PPlus are pressurized water heaters with an operating pressure of 0.6 MPa for one or more hot water draw-off points. Their inner tank is made of steel sheet, whose interior surface is protected against corrosion by high-quality enamel and anode protection.
If connected to a special unpressurized mixing tap can also be operated as unpressurized heaters with an operating pressure of 0 MPa for a single outlet. Installing a safety valve is then not required.
Easy installation, control and maintenance
- simple installation
- option to operate as unpressurized heater (by connecting it to a special unpressurized tap)
- option to set the optimal heating temperature
Multi-stage protection
- safety thermostat
- thermal safety fuse against overheating with reset function
- protection against freezing of the water
Long service life
- special enamel CoPro - double-sided enamelling
- anode protection against corrosion
User comfort
- short heating times
- heating indicator
Economy and low energy consumption
- thermal polystyrene insulation
Description and dimensions
1. Outlet pipe
2. Outlet pipe
3. Rotary temperature control
4. Heating element
5. Wall bracket
| Parameters | ESH10O-PPlus |
|---|---|
| Nominal volume (l) | 10 |
| Heating method | electric |
| Version | pressurized (unpressurized) |
| Nominal tank overpressure (MPa) | 0,6 |
| Electrical voltage | 1/N/PE ~ 230 V |
| Power input (kW) | 2 |
| Max. thermostat cut-off temperature (°C) | max. 82 ± 3 ºC |
| Approx. heating time from 15 °C to 65 °C (min) | 18 min |
| Heat losses (kWh/24h) | 0,36 |
| Weight (kg) | 8,2 |
| Electrical protection rating | IP 24 |
| Energy efficiency class | A |
| HxWxD (cm) | 50,6 x 29,6 x 27,6 |
Frequently Asked Questions
- What tank volume should I choose? A common consumption estimate is roughly 40-50 litres of hot water (at about 40-45 °C) per person per day under standard use (showering, washing); if you take baths or have more bathrooms/outlets, plan for a larger volume. When choosing, also consider whether the tank will be reheated by a high-output boiler (faster heating, a smaller volume may be enough) or, for example, only by a solar system (in which case a larger volume is actually worth it for storing heat during the day).
- Can I connect this TATRAMAT tank to my existing boiler? In most cases yes, but you should check the compatibility of the hydraulic connection (dimensions and type of fittings) and whether your boiler supports controlling the tank's heating (a temperature sensor in the tank and possibly a diverter valve are required) - you'll find these details in the product's technical parameters, or our customer service can advise you.
- Where and how is the tank installed? The tank is placed as close as possible to the heat source (boiler) to minimise heat losses in the connecting pipework, while still leaving enough space around it for service access (anode replacement, safety valve inspection).
- Does installation have to be done by a professional? We always recommend leaving the hydraulic connection to the water supply and the heat source, including fitting a pressure-rated safety valve, to a qualified heating engineer/installer - an incorrectly fitted or missing safety valve is a safety risk.
Additional parameters
| Category: | Pressurised |
|---|---|
| Warranty: | 2 years |
| Weight: | 8 kg |
-
(943 kB) Technical Data Sheet
-
(11,60 MB) Instructions for Use
-
(65 kB) Energy Label and Data Sheet
-
(1,14 MB) Certificate
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!