UNIMIX - universal assembly, without cabinet - 3/4"xEK; 2-way; DAB.EVOSTA2 40-70/130; brass

Product detailed description

• PN 6, T = +90 °C
• the assembly includes:
  universal control and pump module with circulating pump and integrated 3-way mixing valve with alternative
  control options, balancing regulating union and adjustable flow BY-PASS, thermostatic head with separate
  immersion temperature sensor for constant-temperature control, manifold with regulating flow meters, collector with shut-off
  valves, mounting brackets, safety high-limit thermostat, thermometer, 2 automatic air vent valves, 2 rotary fill
  valves, 2 ball valves with unions, 2 plugs and an installation cabinet of the appropriate size
• connection thread internal 3/4” F
• material: brass CW617N

Note:

• can be ordered without cabinet – the price will be reduced by €63.00
• when ordering, state the cabinet type after the order code: code only (flush-mounted), code + N (wall-mounted), or code + BS (without cabinet)
• optional accessory: IVAR.TE 3061 electrothermal head, 24 V, proportional control 0-10 V - surcharge €37.00
• optional accessory: IVAR.UNIMIX SSA 31 electric actuator, 230 V, 3-position control signal - surcharge €107.00

Note:
Switching off the circulating pump is not part of the assembly; it can be controlled by a higher-level control system or by the IVAR.AC 614 E circulating pump control thermostat.

Warning:
Before commissioning the heating system, especially when combining underfloor and radiator heating, we strongly recommend flushing
the whole system according to the manufacturer's instructions. We recommend treating the heating system with GEL.LONG LIFE 100. The seller is not liable for
functional defects caused by impurities in the system.

• How do I choose the correct manifold/accessory? Go by the number of circuits required and the connection size - it must match the diameter of the main supply pipe from the heat source.
• Does the installation have to be done by a professional? Fitting the manifold itself and its accessories can be handled by a competent DIYer, but connecting it into a working heating system and balancing it should be left to a heating engineer.