ELÍZ EURO 200 S21
Code: ELZ_3358Product detailed description
The ELÍZ EURO 200 S21 combined pressure water heater with a volume of 200 liters is suitable for one or more draw-off points. It is designed for vertical floor installation. It contains an electric heating element and two heating coils with the option of connecting to two different media, e.g. a central heating boiler and a solar system. The heater has openings for connecting communication sensors. The advantage of this model is the two coils running the full height of the tank, which significantly increases the speed and comfort of water heating. Suitable for apartments and family houses where it is necessary to place the heater on the floor while using three different media for heating.
The water heater tank and coils are made of quality steel protected by a layer of zirconium enamel. High-quality CFC-free polyurethane insulation guarantees low heat losses and savings on water heating costs. The heater has two built-in anode rods that guarantee effective protection of the tank against corrosion and significantly extend its lifespan.
When heating with the electric heating element, you can use the thermostat on the control panel to set the water temperature in the range of 7 - 75°C, with the option of setting the ECO mode. In ECO mode, the water is heated to the optimal temperature of 55°C, with reduced heat losses and lower electricity consumption. The minimum thermostat value serves as protection against freezing of the water in the heater. The switch with a heating indicator light is used to turn the heater on/off in case of our absence, allowing for energy savings.
Main advantages and features:
- High output, fast water heating
- Energy class B
- Quality steel tank and heating coils protected by zirconium enamel
- CFC-free high-density polyurethane insulation
- Low heat losses and low operating costs thanks to thick insulation
- Safety - unique 6-level protection
- Double anode protection of the tank - 2 magnesium anodes
- Thermostat located on the control panel - range 7 - 75 °C
- Thermal fuse against overheating
- Openings for communication sensor
- ECO mode setting
- Temperature indicator
- Water-resistant switch with heating indicator light
- Metal safety valve with check valve included as part of the heater's accessories
- Extended 5-year warranty on the tank
Additional parameters
| Category: | Combined Vertical with 2 Coils |
|---|---|
| Weight: | 81 kg |
| type: | EURO 200 S21 |
| power input: | 3000 W |
| voltage: | 230 V |
| fuse protection: | 16 A |
| electrical protection rating: | IP 24 |
| power switching: | |
| water connection: | 3/4 '' |
| maximum tank pressure: | 8 bar |
| water heating time 12 - 65 °C: | 4.7 hrs |
| heat losses: | |
| coil connection: | 3/4 " |
| coil S1 surface area: | 0.89 m² |
| coil S1 output: | 25 kW |
| coil S2 surface area: | 0.68 m² |
| coil S2 output: | 18 kW |
| circulation: | |
| wall installation: | no |
| safety fuse: | yes |
| weight: | 81 kg |
| product dimensions: | w / h / d: 600 x 1430 mm |
| tank warranty: | 5 years |
| product warranty: | 2 years |
| maximum water working pressure: | |
| water flow rate 38 °C: |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!