Submersible sewage pumps for pumping waste water in commercial buildings. The pumps are certified to the waste-water standard EN 12050-1. Suitable for fixed installations with a lifting station or for portable use, provided the pump is placed directly on the bottom of the tank. High-performance super vortex impeller with free passage. Double mechanical seal made of silicon carbide in an oil chamber that is not in contact with the pumped liquid. Motor shaft made of AISI 304 stainless steel, cable gland cast in resin. Reduced overall dimensions and the outlet connection is both flanged and threaded. The pumps are designed for quick maintenance thanks to a design that provides easy access to the pump's main components. Single-phase versions with a built-in capacitor, available with a float switch for automatic operation (MA) with an output up to 1.5 kW. For three-phase versions, protection is the responsibility of the user. An ATEX version is available for use in potentially explosive atmospheres. (Certification ATEX: II2G Ex db IIB T4 GB or IEC EX: Ex db IIB T4 Gb)

Operating range: flow rate up to 59.7 m3 / h with a head of up to 18.5 m
Pumped liquid: with fibre, paper or textile material in a domestic or commercial environment
Free passage: solid particles up to 50 mm or 65 mm depending on model
Liquid temperature range: up to + 50°C (+60°C for a short time) + 40°C for the ATEX version
Flanged and threaded connection: 2", DN 50, DN 65
Impeller type: Vortex
Protection class: IP 68
Motor insulation class: F
Maximum dry-running time: 10 min
Possible installation type: portable, fixed with coupling
Special version on request: various cable lengths, voltage and frequency

Frequently Asked Questions

How do I choose the right pump output/head? It must cover the pressure losses of your specific circuit (pipe length, number of fittings) - if in doubt, consult a heating engineer who can size the pump precisely for you.
Must installation be done by a professional? Fitting the pump into a prepared pipe run can be handled by a skilled DIYer, but we recommend having the electrical connection and system balancing checked by a professional.

Additional parameters

Category:	DAB.FEKA FXV - submersible sewage pump
Flanged and threaded connection:	2 ”, DN 50, DN 65
Flow passage:	solids up to 50 mm or 65 mm depending on model
Impeller Type:	Vortex
IP Rating:	IP 68
Maximum dry-running time:	10 min
Motor Winding Insulation Class:	F
Operating range:	flow rate up to 59.7 m³ / h with a head of up to 18.5 m
Rozsah teploty kvapaliny:	up to +50 °C (+60 °C for a short time), +40 °C for the ATEX version
Last price update:	09.03.2026 0:10:45