KVC 40/80 M Y17 Multistage centrifugal pump

Product detailed description

KVC 40/80 M Y17 Multistage centrifugal pump

Technopolymer base body with suction and delivery ports with metal threaded inserts, IN-LINE design, with drain. Fully non-corroding hydraulic part: technopolymer impellers, diffusers and diffuser housings; suction rings, pump casing and seal housing made of stainless steel AISI 304. Carbon-ceramic mechanical seal, drive shaft made of stainless steel AISI 303.

• Asynchronous, enclosed motor cooled by external ventilation
• Single-phase motors with built-in thermal protection and permanently connected capacitor
• Operating range from 50 to 200 l/min with head up to 113 m
• For three-phase motors, overload protection must be installed in accordance with applicable standards
• Protection rating: IP55
• Insulation class: F
• Manufactured to standards: CEI 2-3 and CEI 61-69 (EN 60335 – 2 – 41)
• Liquid temperature range: 0 °C to +35 °C for domestic use (per EN 60335 – 2 – 41)
  0 °C to +40 °C for other uses
• Pumped liquid: clean, free of solids and mineral oils, non-viscous, non-crystallising, chemically neutral, similar in properties to water

Frequently Asked Questions

• How do I choose the right pump output/head? It must cover the pressure losses of your specific circuit (pipe length, number of fittings) - if in doubt, consult a heating engineer, who will size the pump precisely for you.
• Must installation be carried out by a professional? Fitting the pump into prepared pipework can be handled by a DIYer; we recommend having the electrical connection and system balancing checked by a professional.