S4 1/19 M 4OL 4" submersible pump for boreholes and wells - 0,55KW - 1x230V

Product detailed description

S4 1/19 M 4OL 4" submersible pump for boreholes and wells - 0,55KW - 1x230V

Submersible centrifugal pumps for wells and boreholes, with a diameter greater than 4". Pumps sa are used na pumping out water, na tlakovanie
a supply water, to the distribution systems of small and large buildings, residential and industrial, furthermore na irrigation, washing a fire-fighting.
systems. Technopolymer impellers, so suction rings, z stainless steel. Casing pump, shaft, spojka s motorom, integrated suction filter a kryt cable z stainless steel. Sacie teleso, discharge teleso a lifting eyes are z stainless ocele AISI 304 z mikroliatiny. Removable integrated non-return ventil z technopolymer or z stainless steel (v depending od modelu). Technopolymer impellers designed k zaisteniu vysokej level efficiency v accordance so smernicou 2009/125/ES (Eco design - ErP) s indexom MEI ≥ 0,4 across the whole range. Have ACS certification and WRAS certification.

Motor 4OL je two-pole asynchronous motor, whose parts, which are v styku s water, are made z AISI 304 stainless steelL. Chladenie a mazanie ball bearings, ensures special food-grade kvapalina. Rewindable stator je housed v puzdre z AISI 304 stainless steelL, pripevnenom steel pins k hornej podpere motoru.
Equipped with a carbon-ceramic mechanical seal.

• Operating range: to do 21,6 m³/h s head of up to 427 metrov
• Pumped liquid: clean, without solids a abrasive substances, non-viscous, non-aggressive, chemicky neutral, with properties close to water
• Maximum pump diameter: 99 mm
• Maximum sand content: 150 g/m3
• Discharge port diameter: S4-1, S4-2, S4-3, S4-4, S4-6: 1 1/4"
  S4-8, S4-12, S4:16: 2"
• Impeller material: technopolymer
• Liquid temperature range: od 0°C do +40 °C
• Maximum submersion depth: 4OL: 250 m
• Maximum number of starts: 20/h
• Protection rating: IP68
• Insulation class: F
• Single-phase voltage: 1x230 V 50 Hz
• Three-phase voltage: 3x230 V 50 Hz - 3x400 V 50 Hz
• Installation: in a vertical position. Horizontal installation is possible; a cooling jacket is recommended.

Frequently Asked Questions

• How do I choose the right pump output/head? It must cover the pressure losses of your specific circuit (pipe length, number of fittings) - if in doubt, consult a heating engineer who will size the pump precisely for you.
• Must the installation be carried out by a professional? Fitting the pump into prepared pipework can be handled even by a skilled DIYer, but we recommend having the electrical connection and system balancing checked by a professional.