PRESS-GAS transition fitting - external thread - 1"Mx26
Code: 510044GASRelated products
Product detailed description
- external thread
- maximum pressure PN 10, T = -20 °C to +60 °C
- maximum operating pressure PN 5
- for connecting ALPEX-GAS pipe to an internal thread
- material: brass CW617N, seal: HNBR
- compatible with type B jaws
Recommended use according to PTN 704 05
Frequently Asked Questions
- What tools do I need to install this fitting? Press fittings require specialized crimping pliers with the correct jaw type (commonly marked B, F, or TH depending on the system) matching the size and type of the fitting - without the right tool the joint cannot be made or checked.
- How do I know the joint has been crimped correctly? Quality press fittings have a crimp indicator (e.g. a sealing O-ring that leaks if the crimp was not completed) - before embedding in a wall or screed, always carry out a pressure test of the whole system.
- Can the joint be disassembled after crimping? No, unlike a screwed (compression) fitting, a crimped joint is permanent and disassembling it requires cutting out the fitting and replacing it with a new one.
- Does installation have to be carried out by a professional? Yes, crimping fittings requires professional skill and correctly calibrated tools - we recommend leaving it to a heating engineer/plumber, especially for joints that will be embedded in a wall or screed with no possibility of later inspection.
Additional parameters
| Category: | IVAR.PT 5608-GAS - adaptors - male thread |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.131 kg |
| Material type: | mosadz CW617N |
| Operating temperature: | -20 °C |
| Nominal pressure: | PN 10 |
| Last price update: | 13.04.2026 1:04:18 |
Product rating
Be the first who will post an article to this item!
Discussion
List of discussions
R
Rastislav
Rastislav
Chcem použiť túto prechodku PRESS-GAS na pripojenie plynového potrubia s lisovacím fitingom priemeru 26 mm na závitovú časť 1" – je kombinácia press konca 26 mm a vonkajšieho závitu 1" skutočne priama, teda bez potreby akéhokoľvek redukčného medzikusu?
A
ATRIA.SK
ATRIA.SK
Áno, prechodka IVAR.PT 5608-GAS je priamo navrhnutá práve pre túto kombináciu – na jednej strane má lisovací (press) koniec pre potrubie priemeru 26 mm a na druhej strane vonkajší závit 1". Nie je teda potrebný žiadny ďalší redukčný kus, čo zjednodušuje montáž a znižuje počet spojov na plynovom rozvode. Dôležité je použiť správne lisy ovacie kliešte certifikované pre GAS systémy, keďže ide o plynové prevedenie s príslušnou certifikáciou. Odporúčame tiež skontrolovať, či váš lisovací systém (profil čeľustí) zodpovedá fitingom IVAR press-gas série. V prípade pochybností vám radi pomôžeme s výberom vhodného náradia alebo ďalších komponentov z kategórie prechodiek a lisovacích fitingov pre plyn.