Water softening filter - for water hardness treatment - 030

Product detailed description

Water softening filter - for water hardness treatment - 030

• device designed for treating drinking and technological water by softening
• continuous supply of softened water
• fully electronic programming and control unit type WSTWIN
  (control by volume)
• types 140 – 500 use two control units
• must be supplemented with a mixing BY-PASS, e.g. using a TOP-BALL type control ball valve
• connection to the sewer drain and to the 230 V electrical network must be ensured
• includes an external salt tank
• certified for drinking water

Notice: The system must be supplemented according to the IVAR CS spol. s r.o. technical catalogue
(flexible connection, manometers, sampling valves, etc.) and further according to the specific
conditions at the installation site (e.g. pressure reducing valve, mechanical impurity filter, power
failure notification, etc.). For the regeneration cycles to run properly, it is essential
to ensure the device is connected to the sewer drain.

Frequently Asked Questions

• How often does the filter/filter cartridge need to be changed or cleaned? The interval depends on the quality of the inlet water and the intensity of use - we recommend regular visual inspection and cleaning/replacement according to the manufacturer's instructions, or when a visible drop in flow rate occurs.
• Where is the filter installed? Normally on the main water supply into the building, ahead of sensitive equipment (boiler, water system), so that it protects the entire downstream system from impurities.
• Must the installation be carried out by a professional? We recommend having the connection to the water distribution system carried out by a plumber, especially if it requires interrupting the existing pipework.