Water softening filter - for water hardness treatment - 045

Product detailed description

Water softening filter - for water hardness treatment - 045

• equipment designed for treating drinking and process water by softening
• continuous supply of softened water
• fully electronic programming and control unit type WSTWIN
  (volume-based control)
• for type 140 – 500, two control units are used
• must be supplemented with a mixing BY-PASS, e.g. using a TOP-BALL type regulating ball valve
• must be connected to the sewer drain and to the electrical mains with a voltage of 230 V
• includes an external salt tank
• certified for drinking water

Notice: The system must be fitted out according to the IVAR CS spol. s r.o. technical catalogue
(flexible connection, pressure gauges, sampling valves, etc.) and further according to the specific
conditions at the installation site (e.g. pressure reducing valve, mechanical impurity filter,
power failure notification, etc.). To ensure the regeneration cycles run properly, the unit must
be connected to the sewer drain.

Frequently Asked Questions

• How often does the filter/filter cartridge need to be replaced or cleaned? The interval depends on the quality of the incoming water and the intensity of use - we recommend regular visual inspection and cleaning/replacement according to the manufacturer's instructions, or whenever flow visibly decreases.
• Where is the filter installed? Typically on the main water supply to the building, upstream of sensitive equipment (boiler, water pump system), so it protects the entire downstream system from impurities.
• Must installation be carried out by a professional? We recommend having the connection to the water supply carried out by a plumber, especially if it requires cutting into an existing pipe.