90° T-piece PRESS GAS - with internal thread - 54-Rp3/4"-54

Product detailed description

T-piece 90° PRESS GAS - with internal thread - 54-Rp3/4"-54

• PN 5, T = -20 °C to +70 °C
• T-piece 90° with internal thread PRESS x THREAD x PRESS
• purpose of use: for natural gas, biogas and propane gas-phase piping systems
• material: stainless steel Wst. Nr. 1.4404 (AISI 316L), yellow HNBR sealing O-ring
• certified by SZÚ Brno, DVGW

Note: PRESS GAS fittings in sizes 76.1, 88.9 and 108 mm are available on request.

Frequently Asked Questions

• What tools do I need to install this fitting? Press fittings require specialized press pliers with the correct jaw type (commonly marked B, F, or TH depending on the system) matching the size and type of the fitting - without the proper tool, the joint cannot be made or checked.
• How do I know the joint has been pressed correctly? Quality press fittings have a press indicator (e.g. a sealing O-ring that leaks if pressing is incomplete) - a pressure test of the whole system should always be performed before the fitting is embedded in a wall or screed.
• Can the joint be disassembled after pressing? No, unlike a screwed (compression) fitting, a pressed joint is permanent and removing it requires cutting out the fitting and replacing it with a new one.
• Must the installation be carried out by a professional? Yes, pressing fittings requires professional skill and correctly calibrated tools - we recommend entrusting the job to a heating engineer/plumber, especially for joints that will be embedded in a wall or screed without the possibility of later inspection.