Adapter PRESS GAS - with female thread - 28mm-Rp1"

Product detailed description

PRESS GAS adapter - with internal thread - 28mm-Rp1"

• PN 5, T = -20 °C to +70 °C
• adapter with internal thread PRESS x THREAD
• purpose: for natural gas, biogas and propane gas phase distribution systems
• material: stainless steel Wst. Nr. 1.4404 (AISI 316L), yellow HNBR sealing O-ring
• certified by SZÚ Brno, DVGW

Frequently Asked Questions

• What tools do I need to install this fitting? Press fittings require specialized pressing tongs with the correct type of jaw (commonly designated B, F, or TH depending on the system) matching the size and type of the fitting - without the proper tools, the joint cannot be made or checked.
• How do I know the joint has been pressed correctly? Quality press fittings have a press indicator (e.g. a sealing O-ring that leaks if pressing is incomplete) - a pressure test of the entire system must always be carried out before embedding it in a wall or screed.
• Can the joint be disassembled after pressing? No, unlike a screwed (compression) fitting, a pressed joint is permanent and disassembling it requires cutting out the fitting and replacing it with a new one.
• Must the installation be carried out by a professional? Yes, pressing fittings requires professional skill and properly calibrated tools - we recommend entrusting this to a heating engineer/plumber, especially for joints that will be embedded in a wall or screed without the possibility of later inspection.