Adapter PRESS GAS - with an internal thread - 54mm-Rp2"

Product detailed description

PRESS GAS transition piece - with internal thread - 54mm-Rp2"

• PN 5, T = -20 °C to +70 °C
• transition piece with internal thread PRESS x THREAD
• purpose of use: for natural gas, biogas and propane distribution systems in the gaseous phase
• material: stainless steel Wst. Nr. 1.4404 (AISI 316L), sealing O-ring HNBR yellow
• certified by SZÚ Brno, DVGW

Frequently Asked Questions

• What tools do I need to install this fitting? Press fittings require specialized pressing tongs with the correct type of jaw (commonly labeled B, F, or TH depending on the system) matching the size and type of the fitting - without the right tool, the joint cannot be made or checked.
• How do I know the joint has been pressed correctly? Quality press fittings have a press indicator (e.g. a sealing O-ring that leaks if the pressing is incomplete) - a pressure test of the whole system should always be performed before the joint is covered by a wall or screed.
• Can the joint be disassembled after pressing? No, unlike a screwed (compression) fitting, a pressed joint is permanent and disassembly requires cutting out the fitting and replacing it with a new one.
• Must installation be carried out by a professional? Yes, pressing fittings requires professional skill and properly calibrated tools - we recommend entrusting it to a heating engineer/plumber, especially for joints that will be embedded in a wall or screed without the possibility of later inspection.