Adapter PRESS GAS - with external thread - 28mm-R1"

Product detailed description

PRESS GAS transition piece - with male thread - 28mm-R1"

• PN 5, T = -20 °C to +70 °C
• transition piece with male thread PRESS x THREAD
• purpose of use: for natural gas, biogas and propane distribution in the gaseous phase
• material: stainless steel Wst. Nr. 1.4404 (AISI 316L), yellow HNBR sealing O-ring
• SZÚ Brno, DVGW certification

Note: PRESS GAS fitting dimensions 76.1 and 88.9 mm available on order.

Frequently Asked Questions

• What tools do I need to install this fitting? Press fittings require specialized press pliers with the correct jaw type (commonly labeled B, F, or TH depending on the system) matching the size and type of the fitting - without the proper tool, the joint cannot be made or checked.
• How do I know the joint has been pressed correctly? Quality press fittings have a press indicator (e.g. a sealing O-ring that leaks if pressing is incomplete) - a pressure test of the entire system should always be carried out before the joint is embedded in a wall or screed.
• Can the joint be disassembled after pressing? No, unlike a screwed (compression) connection, a pressed joint is permanent and disassembly requires cutting out the fitting and replacing it with a new one.
• Must installation be carried out by a professional? Yes, pressing fittings requires professional skill and correctly calibrated tools - we recommend leaving this to a heating engineer/plumber, especially for joints that will be embedded in a wall or screed without the possibility of later inspection.