Adapter PRESS GAS - with internal thread - 35mm-Rp5/4"

Product detailed description

adapter PRESS GAS - s internal thread - 35mm-Rp5/4"

• PN 5, T = -20 °C az +70 °C
• adapter s vnitřnim zavitem PRESS x ZAVIT
• intended use: natural gas, biogas and propane (gas phase) distribution
• material: stainless steel Wst. Nr. 1.4404 (AISI 316L), yellow HNBR sealing O-ring
• certified by SZU Brno, DVGW

Frequently Asked Questions

• What tools do I need to install this fitting? Press fittings require specialized press jaws with the correct jaw type (commonly marked B, F, or TH depending on the system) matching the fitting's size and type - without the right tool the joint cannot be made or checked.
• How do I know the joint has been pressed correctly? Quality press fittings have a press indicator (e.g. a sealing O-ring that leaks if pressing is incomplete) - before being embedded in a wall or screed, the entire system must always undergo a pressure test.
• Can the joint be disassembled after pressing? No, unlike a screwed (compression) union, a pressed joint is permanent, and taking it apart requires cutting off the fitting and replacing it with a new one.
• Does installation have to be done by a professional? Yes, pressing fittings requires professional skill and correctly calibrated tools - we recommend leaving it to a heating engineer/plumber, especially for joints that will be embedded in a wall or screed without the possibility of later inspection.