Check valve, flanged - series 05 - DN 50; L=100mm

Product detailed description

 Check valve - flanged, BRA.F5.000, size: DN 50, length: 100 mm

• max. pressure 16 bar, flanges PN 16 according to STN EN 1092-1
• T = -10 °C to max. +100 °C
• for heating and air conditioning (HVAC), water distribution systems, compressed air, oils and hydrocarbons
• material: body - cast iron, guide and disc - brass, seal - NBR
• installation in all positions
• minimum back pressure: 0.1 bar
• opening pressure depending on position – see technical data sheet
• suitable for water with up to 50% glycol content
• not suitable for steam
• certified for drinking water, RÚVZ Poprad

Frequently Asked Questions

• How to choose the correct type and size of fitting/valve? Follow the nominal pressure (PN) and operating temperature (T) specified in the technical parameters - they must match or exceed the actual operating conditions of your system, and the connection size must match the pipe diameter.
• How does this fitting/valve work? The exact operating principle (shutting off, pressure regulation, backflow prevention, etc.) depends on the specific type - a detailed description of the function can be found above for this product.
• Must installation be carried out by a professional? For simpler shut-off fittings, even a home handyman can manage the installation, but for control and safety fittings (safety valves, pressure reducing valves), we always recommend a professional, as these are components with a safety function.