Elbow 45° PRESS GAS - with one push-fit end - 18mm

Product detailed description

45° elbow PRESS GAS - with one push-fit end - 18mm

• PN 5, T = -20 °C to +70 °C
• 45° elbow with one push-fit end PRESS x d
• intended use: for natural gas, biogas and propane distribution in gaseous phase
• material: stainless steel Wst. Nr. 1.4404 (AISI 316L), yellow HNBR sealing O-ring
• certified by SZÚ Brno, DVGW

Note: Dimensions of PRESS GAS fittings 76.1, 88.9 and 108 mm available on request.

Frequently Asked Questions

• What tools do I need to install this fitting? Press fittings require specialized crimping pliers with the correct jaw type (commonly labeled B, F, or TH depending on the system) matching the size and type of the fitting - without the proper tool, the joint cannot be made or verified.
• How do I know the joint has been properly pressed? Quality press fittings feature a press indicator (e.g. a sealing O-ring that leaks if crimping is incomplete) - a pressure test of the entire system must always be carried out before it is embedded in a wall or screed.
• Can the joint be disassembled after pressing? No, unlike a screwed (compression) fitting, a pressed joint is permanent and disassembly requires cutting out the fitting and replacing it with a new one.
• Must installation be carried out by a professional? Yes, pressing fittings requires professional skill and properly calibrated tools - we recommend entrusting this to a heating engineer/plumber, especially for joints that will be embedded in a wall or screed without the possibility of later inspection.