Elbow 45° PRESS GAS - with one push-fit end - 28mm

Product detailed description

45° elbow PRESS GAS - with one push-in end - 28mm

• PN 5, T = -20 °C to +70 °C
• 45° elbow with one PRESS x d push-in end
• purpose of use: for natural gas, biogas and propane gas-phase piping systems
• material: stainless steel Wst. Nr. 1.4404 (AISI 316L), yellow HNBR sealing O-ring
• SZÚ Brno certificate, DVGW

Note: Dimensions of PRESS GAS fittings 76.1, 88.9 and 108 mm available on request.

Frequently Asked Questions

• What tools do I need to install this fitting? Press fittings require specialized pressing tongs with the correct type of jaw (commonly designated B, F, or TH depending on the system) matching the size and type of the fitting - without the proper tool, the joint cannot be made or checked.
• How do I know the joint has been properly pressed? Quality press fittings feature a press indicator (e.g. a sealing O-ring that leaks if the pressing is incomplete) - a pressure test of the entire system should always be carried out before the joint is embedded in a wall or screed.
• Can the joint be disassembled after pressing? No, unlike a screwed (compression) fitting, a pressed joint is permanent and removing it requires cutting out the fitting and replacing it with a new one.
• Must the installation be carried out by a professional? Yes, pressing fittings requires professional skill and properly calibrated tools - we recommend having it done by a heating technician/plumber, especially for joints that will be embedded in a wall or screed without the possibility of later inspection.