Elbow 90° PRESS GAS - 35mm

Product detailed description

90° elbow PRESS GAS - 35mm

• PN 5, T = -20 °C to +70 °C
• 90° elbow PRESS x PRESS
• purpose of use: for natural gas, biogas and propane piping systems in gaseous phase
• material: stainless steel Wst. Nr. 1.4404 (AISI 316L), yellow HNBR sealing O-ring
• SZÚ Brno, DVGW certification

Note: Dimensions of PRESS GAS fittings 76.1, 88.9 and 108 mm available on request.

Frequently Asked Questions

• What tools do I need to install this fitting? Press fittings require specialized crimping pliers with the correct jaw type (commonly designated B, F, or TH depending on the system) matching the size and type of the fitting - without the proper tool, the joint cannot be made or checked.
• How do I know the joint has been properly pressed? Quality press fittings have a press indicator (e.g. a sealing O-ring that leaks if pressing is incomplete) - a pressure test of the entire system must always be performed before the joint is embedded in a wall or screed.
• Can the joint be disassembled after pressing? No, unlike a screwed (compression) fitting, a pressed joint is permanent and disassembly requires cutting out the fitting and replacing it with a new one.
• Must the installation be carried out by a professional? Yes, pressing fittings requires professional skill and correctly calibrated tools - we recommend entrusting this to a heating engineer/plumber, especially for joints that will be embedded in a wall or screed without the possibility of later inspection.