Elbow 90° PRESS GAS - 54mm

Product detailed description

90° elbow PRESS GAS - 54mm

• PN 5, T = -20 °C to +70 °C
• 90° elbow PRESS x PRESS
• purpose of use: for natural gas, biogas and propane gas phase piping systems
• material: stainless steel Wst. Nr. 1.4404 (AISI 316L), yellow HNBR sealing O-ring
• SZÚ Brno certificate, DVGW

Note: Dimensions of PRESS GAS fittings 76.1, 88.9 and 108 mm available on request.

Frequently Asked Questions

• What tools do I need to install this fitting? Press fittings require specialized press jaws/pliers with the correct type of jaw (commonly designated B, F, or TH depending on the system) matching the size and type of the fitting - without the proper tool, the joint cannot be made or checked.
• How do I know the joint has been pressed correctly? Quality press fittings have a press indicator (e.g. a sealing O-ring that leaks if pressing is incomplete) - a pressure test of the entire system must always be performed before the joint is embedded in a wall or screed.
• Can the joint be disassembled after pressing? No, unlike a screwed (compression) connection, a pressed joint is permanent and disassembly requires cutting out the fitting and replacing it with a new one.
• Must the installation be performed by a professional? Yes, pressing fittings requires professional skill and properly calibrated tools - we recommend entrusting this to a heating engineer/plumber, especially for joints that will be embedded in a wall or screed without the possibility of later inspection.