Flange filter with magnet - series 11.000 M - DN 50; L=230mm

Product detailed description

Flange filter - with magnet, BRA.11.000 M, size: DN 50, length: 230 mm

• max. pressure 16 bar
• installed between PN16 flanges according to STN EN 1092-1
• T = -10 °C to max. +100 °C
• for heating and air conditioning (HVAC), water distribution, pumping stations
• material - body, cover: cast iron GJL 250, strainer: AISI 304, seal: EPDM
• mesh size depending on dimension from 0.8 to 1.6 mm
• with a blow-down screw
• suitable for water containing up to 50% glycol
• not suitable for steam, gases, or liquids containing oils or hydrocarbons

Frequently Asked Questions

• How do I choose the right type and size of fitting/valve? Follow the nominal pressure (PN) and operating temperature (T) stated in the technical parameters - they must match or exceed the actual operating conditions of your system, and the connection size must match the pipe diameter.
• How does this fitting/valve work? The exact operating principle (shut-off, pressure regulation, non-return function, etc.) depends on the specific type - a detailed description of the function can be found above for this product.
• Must installation be carried out by a professional? Simpler shut-off fittings can be installed by a skilled DIYer, but for control and safety fittings (safety valves, pressure-reducing valves) we always recommend a professional, since these are components with a safety function.