PRESS fitting cap - stainless steel AISI 316 - 54mm

Product detailed description

PRESS fitting cap - N - 54mm

• PN 16, T = -20 °C to +85 °C - max. +120 °C
• fitting cap d
• intended use: for sanitary installations, sprinkler systems,
  heating systems, compressed air, solar systems, inert gases and industry
• material: stainless steel grade Wst. Nr. 1.4404 (AISI 316L)

Note: Not leak-tight unless pressed, and with a press indicator up to a size of 54 mm.

Frequently Asked Questions

• What tools do I need to install this fitting? Press fittings require specialized press pliers with the correct type of jaw (commonly marked B, F or TH depending on the system) matching the size and type of the fitting - without the right tool the joint cannot be made or checked.
• How do I know the joint has been pressed correctly? Quality press fittings have a press indicator (e.g. a sealing O-ring that leaks if the pressing is incomplete) - before the joint is embedded in a wall or screed, a pressure test of the whole system should always be carried out.
• Can the joint be taken apart after pressing? No, unlike a compression (screw) fitting, a pressed joint is permanent, and taking it apart requires cutting out the fitting and replacing it with a new one.
• Does the installation have to be done by a professional? Yes, pressing fittings requires professional skill and correctly calibrated tools - we recommend leaving it to a heating engineer/plumber, especially for joints that will be embedded in a wall or screed with no possibility of later inspection.