PRESS GAS adapter - with internal thread - 22mm-Rp3/4"

Product detailed description

PRESS GAS transition fitting - with female thread - 22mm-Rp3/4"

• PN 5, T = -20 °C to +70 °C
• transition fitting with female thread PRESS x THREAD
• purpose of use: for natural gas, biogas and propane distribution in gaseous phase
• material: stainless steel Wst. Nr. 1.4404 (AISI 316L), sealing O-ring HNBR yellow
• certified by SZÚ Brno, DVGW

Frequently Asked Questions

• What tools do I need to install this fitting? Press fittings require specialized pressing pliers with the correct type of jaw (commonly labeled B, F, or TH depending on the system) matching the size and type of the fitting - without the proper tool, the joint cannot be made or checked.
• How do I know the joint has been pressed correctly? Quality press fittings have a press indicator (e.g. a sealing O-ring that leaks if the pressing is incomplete) - a pressure test of the entire system should always be carried out before the joint is embedded in a wall or screed.
• Can the joint be disassembled after pressing? No, unlike a screwed (compression) fitting, a pressed joint is permanent and disassembly requires cutting out the fitting and replacing it with a new one.
• Must the installation be carried out by a professional? Yes, pressing fittings requires professional skill and correctly calibrated tools - we recommend entrusting this to a heating engineer/plumber, especially for joints that will be embedded in a wall or screed without the possibility of later inspection.