PRESS GAS adaptor - with external thread - 35mm-R1"

Product detailed description

PRESS GAS transition piece - with external thread - 35mm-R1"

• PN 5, T = -20 °C to +70 °C
• transition piece with external thread PRESS x THREAD
• purpose of use: for natural gas, biogas and propane distribution systems in the gaseous phase
• material: stainless steel Wst. Nr. 1.4404 (AISI 316L), yellow HNBR sealing O-ring
• certified by SZÚ Brno, DVGW

Note: Dimensions of PRESS GAS fittings 76.1 and 88.9 mm on request.

Frequently Asked Questions

• What tools do I need to install this fitting? Press fittings require specialized pressing tongs with the correct type of jaw (commonly marked B, F, or TH depending on the system) corresponding to the size and type of the fitting - without the correct tool, the joint cannot be made or checked.
• How do I know the joint has been pressed correctly? Quality press fittings have a press indicator (e.g. a sealing O-ring that leaks if pressing is incomplete) - before embedding in a wall or screed, a pressure test of the whole system should always be performed.
• Can the joint be disassembled after pressing? No, unlike a screwed (compression) fitting, a pressed joint is permanent and disassembly requires cutting out the fitting and replacing it with a new one.
• Must installation be carried out by a professional? Yes, pressing fittings requires professional skill and correctly calibrated tools - we recommend entrusting this to a heating engineer/plumber, especially for joints that will be embedded in a wall or screed without the possibility of later inspection.