PRESS GAS adaptor - with female thread - 18mm-Rp1/2"

Product detailed description

PRESS GAS transition piece - with internal thread - 18mm-Rp1/2"

• PN 5, T = -20 °C to +70 °C
• transition piece with internal thread PRESS x THREAD
• purpose of use: for natural gas, biogas and propane distribution in gaseous phase
• material: stainless steel Wst. Nr. 1.4404 (AISI 316L), HNBR yellow sealing O-ring
• SZÚ Brno certificate, DVGW

Frequently Asked Questions

• What tools do I need to install this fitting? Press fittings require specialized pressing pliers with the correct type of jaw (commonly designated B, F, or TH depending on the system) matching the size and type of the fitting - without the proper tool, the connection cannot be made or checked.
• How do I know the joint has been pressed correctly? Quality press fittings have a press indicator (e.g. a sealing O-ring that leaks if the pressing is incomplete) - a pressure test of the entire system must always be performed before the joint is embedded in a wall or screed.
• Can the joint be disassembled after pressing? No, unlike a screwed (compression) fitting, a pressed joint is permanent and disassembly requires cutting out the fitting and replacing it with a new one.
• Must the installation be carried out by a professional? Yes, pressing fittings requires professional skill and correctly calibrated tools - we recommend entrusting the job to a heating engineer/plumber, especially for joints that will be embedded in a wall or screed without the possibility of later inspection.