Reducer PRESS GAS - with one push-fit end - 42-35mm

Product detailed description

• PN 5, T = -20 °C to +70 °C
• reducer with one PRESS x d push-fit end
• intended use: for natural gas, biogas and propane distribution in the gaseous phase
• material: stainless steel Wst. Nr. 1.4404 (AISI 316L), yellow HNBR sealing O-ring
• certified by SZÚ Brno, DVGW

Note: Dimensions of PRESS GAS 76.1, 88.9 and 108 mm fittings available on request.

Frequently asked questions

• What tools do I need to install this fitting? Press fittings require specialized crimping pliers with the correct jaw type (commonly designated B, F, or TH depending on the system) matching the size and type of the fitting - without the right tool, the joint cannot be made or checked.
• How do I know the joint has been pressed correctly? Quality press fittings have a press indicator (e.g. a sealing O-ring that leaks if pressing is incomplete) - before embedding in a wall or screed, a pressure test of the entire system must always be carried out.
• Can the joint be disassembled after pressing? No, unlike a screwed (compression) fitting, a pressed joint is permanent and removing it requires cutting out the fitting and replacing it with a new one.
• Must the installation be carried out by a professional? Yes, pressing fittings requires professional skill and correctly calibrated tools - we recommend entrusting this to a heating engineer/plumber, especially for joints that will be embedded in a wall or screed without the possibility of later inspection.