Replacement filter cartridge - for the series BRA.11.000 a BRA.11.000 M - DN 80

Product detailed description

Replacement filter cartridge - for the series BRA.11.000 a BRA.11.000 M - DN 80

• max. pressure 16 bar for DN 32 - 200; 10 bar for DN 250 - 350
• installed between flanges PN16 to STN EN 1092-1
• T = -10 °C up to max. +100 °C
• for heating and air conditioning (HVAC), water distribution systems, pumping stations
• material - body, cap: cast iron GJL 250, strainer: AISI 304, seal: EPDM
• porosity depending on size from 0.8 up to 1.6 mm, with a drain screw
• for use with water containing up to 50% glycol
• not suitable for steam, gases and liquids containing oils or hydrocarbons

Frequently asked questions

• How do I choose the right type and size of fitting/valve? Follow the nominal pressure (PN) and operating temperature (T) stated in the technical parameters - they must match or exceed the actual operating conditions of your system, and the connection size must match the pipe diameter.
• How does this fitting/valve work? The exact operating principle (shut-off, pressure regulation, non-return function, etc.) depends on the specific type - a detailed description of the function can be found above for this product.
• Does installation have to be carried out by a professional? A DIY user can manage the installation of simpler shut-off fittings; for control and safety fittings (safety valves, pressure-reducing valves) we always recommend a professional, as these are safety-critical components.