T-piece 90° PRESS GAS - with internal thread - 35-Rp1/2"-35

Product detailed description

T-piece 90° PRESS GAS - with female thread - 35-Rp1/2"-35

• PN 5, T = -20 °C to +70 °C
• 90° T-piece with female thread PRESS x THREAD x PRESS
• purpose of use: for natural gas, biogas and propane pipelines in gaseous phase
• material: stainless steel Wst. Nr. 1.4404 (AISI 316L), sealing O-ring HNBR yellow
• certificate SZÚ Brno, DVGW

Note: Dimensions of PRESS GAS fittings 76.1, 88.9 and 108 mm on order.

Frequently Asked Questions

• What tools do I need to install this fitting? Press fittings require specialized crimping pliers with the correct jaw type (commonly labeled B, F, or TH depending on the system) matching the size and type of the fitting - without the proper tool, the joint cannot be made or checked.
• How do I know the joint has been correctly pressed? Quality press fittings have a press indicator (e.g. a sealing O-ring that leaks if the pressing is not completed) - before embedding in a wall or screed, a pressure test of the entire system must always be carried out.
• Can the joint be disassembled after pressing? No, unlike a threaded (compression) fitting, a pressed joint is permanent and disassembly requires cutting out the fitting and replacing it with a new one.
• Must the installation be carried out by a professional? Yes, pressing fittings requires professional skill and correctly calibrated tools - we recommend entrusting this to a heating engineer/plumber, especially for joints that will be embedded in a wall or screed without the possibility of later inspection.