T-piece 90° PRESS GAS - with female thread - 54-Rp2"-54

Product detailed description

90° Tee PRESS GAS - with female thread - 54-Rp2"-54

• PN 5, T = -20 °C to +70 °C
• 90° tee with female thread PRESS x THREAD x PRESS
• purpose of use: for natural gas, biogas, and propane gas phase piping
• material: stainless steel Wst. Nr. 1.4404 (AISI 316L), yellow HNBR sealing O-ring
• SZÚ Brno, DVGW certification

Note: Dimensions of PRESS GAS fittings 76.1, 88.9 and 108 mm are available on order.

Frequently Asked Questions

• What tools do I need to install this fitting? Press fittings require specialized crimping pliers with the correct type of jaw (commonly designated B, F, or TH depending on the system) matching the size and type of the fitting - without the proper tools, the joint cannot be made or checked.
• How do I know the joint has been pressed correctly? Quality press fittings have a press indicator (e.g. a sealing O-ring that leaks if the crimping is incomplete) - a pressure test of the entire system must always be carried out before the fitting is covered in a wall or screed.
• Can the joint be disassembled after pressing? No, unlike a screwed (compression) connection, a pressed joint is permanent, and disassembly requires cutting out the fitting and replacing it with a new one.
• Must installation be carried out by a professional? Yes, pressing fittings requires professional skill and correctly calibrated tools - we recommend entrusting the work to a heating engineer/plumber, especially for joints that will be covered in a wall or screed without the possibility of later inspection.