Transition elbow 90° PRESS GAS - with internal thread - 22 mm-Rp3/4"

Product detailed description

90° transition elbow PRESS GAS - with internal thread - 22mm-Rp3/4"

• PN 5, T = -20 °C to +70 °C
• 90° transition elbow with internal thread PRESS x THREAD
• purpose of use: for natural gas, biogas and propane gas phase distribution systems
• material: stainless steel Wst. Nr. 1.4404 (AISI 316L), yellow HNBR sealing O-ring
• certified by SZÚ Brno, DVGW

Frequently Asked Questions

• What tools do I need to install this fitting? Press fittings require specialized pressing pliers with the correct type of jaw (commonly marked B, F, or TH depending on the system) matching the size and type of the fitting - without the right tool, the joint cannot be made or checked.
• How do I know the joint has been pressed correctly? Quality press fittings have a press indicator (e.g. a sealing O-ring that leaks if pressing is incomplete) - a pressure test of the entire system should always be performed before it is embedded in a wall or screed.
• Can the joint be disassembled after pressing? No, unlike a screwed (compression) fitting, a pressed joint is permanent, and disassembling it requires cutting off the fitting and replacing it with a new one.
• Must the installation be carried out by a professional? Yes, pressing fittings requires professional skill and correctly calibrated tools - we recommend leaving it to a heating engineer/plumber, especially for joints that will be embedded in a wall or screed without the possibility of later inspection.