Transition elbow 90° PRESS GAS - with internal thread - 28mm-Rp1"

Product detailed description

Transition elbow 90° PRESS GAS - with internal thread - 28mm-Rp1"

• PN 5, T = -20 °C to +70 °C
• transition elbow 90° with internal thread PRESS x THREAD
• purpose of use: for natural gas, biogas and propane distribution in gaseous phase
• material: stainless steel Wst. Nr. 1.4404 (AISI 316L), yellow HNBR sealing O-ring
• SZÚ Brno certification, DVGW

Frequently Asked Questions

• What tools do I need to install this fitting? Press fittings require specialized pressing pliers with the correct type of jaw (commonly labeled B, F, or TH depending on the system) corresponding to the size and type of the fitting - without the proper tool, the joint cannot be made or checked.
• How do I know the joint has been pressed correctly? Quality press fittings have a pressing indicator (e.g. a sealing O-ring that leaks if pressing is incomplete) - a pressure test of the entire system must always be performed before the joint is embedded in a wall or screed.
• Can the joint be disassembled after pressing? No, unlike a screwed (compression) fitting, a pressed joint is permanent and disassembly requires cutting out the fitting and replacing it with a new one.
• Must the installation be carried out by a professional? Yes, pressing fittings requires professional skill and properly calibrated tools - we recommend entrusting this to a heating engineer/plumber, especially for joints that will be embedded in a wall or screed without the possibility of later inspection.