Wafer check valve, spring-loaded - series W6; stainless steel - DN 40; L=31mm
Code: W6626040Related products
Product detailed description
Wafer check valve - spring-loaded, BRA.W6.626, size: DN 40, length: 31 mm
- max. pressure 40 bar
- wafer type between flanges PN 16/PN 10/PN 6 acc. to STN EN 1092-1
- T = -20 °C to max. +350 °C
- for heating and air conditioning (HVAC), water systems, pumping stations, oils and hydrocarbons, chemical industry
- material: body, disc and web - stainless steel A351 CF8M, seal - metal-to-metal
- installation in any position
- minimum back pressure 0.1 bar
- opening pressure according to size - see technical data sheet
- suitable for water containing up to 50% glycol
- certified for drinking water
Frequently Asked Questions
- How do I choose the right type and size of fitting/valve? Follow the nominal pressure (PN) and operating temperature (T) stated in the technical parameters - they must match or exceed the actual operating conditions of your system, and the connection size must match the pipe diameter.
- How does this fitting/valve work? The exact operating principle (shut-off, pressure regulation, non-return function, etc.) depends on the specific type - you can find a detailed description of the function above for this product.
- Does the installation have to be done by a professional? Simple shut-off fittings can be installed even by a skilled DIYer, but for control and safety fittings (safety valves, pressure reducing valves) we always recommend a professional, as these are components with a safety function.
Additional parameters
| Category: | spring-loaded check valves - stainless steel |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.7 kg |
| Material type: | telo |
| Nominal diameter: | DN 40 |
| Nominal pressure: | PN 16/PN 10 |
| Last price update: | 13.04.2026 1:05:05 |
Product rating
Be the first who will post an article to this item!
Discussion
List of discussions
R
Rastislav
Rastislav
Chcel by som sa opýtať, či je tento medziprírubový spätný ventil série W6 v DN 40 kompatibilný so štandardnými prírubami PN 16, keďže plánujem jeho inštaláciu do existujúceho potrubia s prírubovými spojmi práve tejto tlakovej triedy.
A
ATRIA.SK
ATRIA.SK
Áno, ventily série W6 sú navrhnuté pre montáž medzi štandardné príruby PN 16, takže by to malo sedieť. Dôležité je tiež počítať s dĺžkou 31 mm, ktorú ventil pridá medzi príruby – to treba zohľadniť pri rozmerovaní priestoru. Ak by ste potrebovali aj vhodné tesnenia alebo skrutky pre prírubový spoj, radi poradíme.
J
jozef
jozef
Dobrý deň Mám záujem o 2x spätnú klapku BRA.W6.626 DN 40. Prosím o info Za aký čas ju viete dodat a cenovú relaciu.
A
atria
atria
Dobrý deň, Na priloženom odkaze nájdete daný produkt aj s aktuálnou cenou - https://www.atria.sk/spatna-klapka-dn-40-31-5-mm-nerez/. Doba dodania je 1 týždeň. Prajem pekný deň.